TM 5-3895-385-23-2
0261
Right Pedestal Assembly Removal -- Continued.
CAUTION
Tag and label electrical wires prior to removal. Electrical wires must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
2. Disconnect four electrical connectors (Figure 1, Item 5).
3. Remove eight bolts (Figure 1, Item 3) and 16 lock washers (Figure 1, Item 2) from pedestal assembly.
Discard lock washers.
4. Remove pedestal assembly (Figure 1, Item 1) from pedestal assembly mounting bracket (Figure 1, Item 4).
END OF TASK
Right Pedestal Assembly Installation
1. Install pedestal assembly (Figure 1, Item 1) onto pedestal assembly mounting bracket (Figure 1, Item 4).
2. Install eight bolts (Figure 1, Item 3) and 16 new lock washers (Figure 1, Item 2) onto pedestal assembly
(Figure 1, Item 1).
3. Connect four electrical connectors (Figure 1, Item 5).
4. Install three bolts (Figure 1, Item 6), lock washers (Figure 1, Item 7), flat washers (Figure 1, Item 8), and lower
pedestal cover (Figure 1, Item 9) onto pedestal assembly.
END OF TASK