TM 5-3895-385-23-2
0241
Screed Control Keypad Installation
1. Install keypad (Figure 1, Item 7) into control box cover (Figure 1, Item 3), and install new locking nut (Figure 1,
Item 4) on each keypad post (Figure 1, Item 5).
2. Connect plug (Figure 1, Item 8) into keypad connector (Figure 1, Item 6).
3. Raise screed control box cover (Figure 1, Item 3).
4. Install clamps (Figure 1, Item 1) and two screws (Figure 1, Item 2) into mounting bracket (Figure 1, Item 9).
END OF TASK
FOLLOW-ON TASK
1. Set BATTERY DISCONNECT switch to ON (TM 5-3895-385-10).
2. Verify proper operation.
END OF TASK
END OF WORK PACKAGE