TM 5-3895-385-23-2
0230
Front Screed Arm Removal -- Continued.
Figure 2. Front Screed Arm -- Removal.
NOTE
It may be necessary to use a lifting device and/or hydraulic cylinders to raise screed arm enough
to remove pins and bolts from screed arm.
3. Remove cotter pin (Figure 2, Item 3) from clevis pin (Figure 2, Item 5). Discard cotter pin.
4. Remove clevis pin (Figure 2, Item 5) from tow point hydraulic cylinder (Figure 2, Item 2) and screed arm
mounting points.
5. Remove tow point hydraulic cylinder (Figure 2, Item 2) from screed arm (Figure 2, Item 4).
6. Remove bolt (Figure 2, Item 6), nut (Figure 2, Item 1), and spacer along with bushing (Figure 2, Item 7) from
screed arm (Figure 2, Item 4).