TM 5-3895-385-23-1
0209
Table 1. Right Neutral Signal Malfunction Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Measure for continuity (WP
1. If continuity is present, proceed
0443, Vol 3) between main
to next malfunction.
wiring harness W1 J2 Pin 7 and
W1 J32 Pin 6 (WP 0451, Vol 3,
Figure 2).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
3. Right pedestal wiring harness
1. Access platform control (WP
has an open circuit.
0262, Vol 2).
2. Disconnect W9 J6 from wiring
harness (WP 0451, Vol 3, Figure
25).
3. Measure for continuity (WP
1. If continuity is present, proceed
0443, Vol 3) between right
to next malfunction.
pedestal wiring harness W9 J1
Pin 1 and right pedestal wiring
harness W9 J6 Pin 6 (WP 0451,
Vol 3, Figures 25 and 26).
2. If no continuity is present,
replace right pedestal wiring
harness (WP 0375, Vol 2).
4. Right joystick malfunction.
1. Measure for continuity (WP
1. If continuity is present, proceed
0443, Vol 3) between neutral
to next malfunction.
signal post 1 and 2 on left
joystick (WP 0447, Vol 3, Figure
14).
2. If no continuity is present,
replace joystick (WP 0267, Vol
2).
2. Measure for continuity (WP
1. If continuity is present, replace
0443, Vol 3) between post
right neutral pause wiring
neutral signal post 3 and 4 on
harness (WP 0382, Vol 2).
right on joystick (WP 0447, Vol
3, Figure 14).
2. If no continuity is present,
replace joystick (WP 0267, Vol
2).
END OF WORK PACKAGE
0209-2