TM 5-3895-385-23-1
0194
Table 1 Right Console Right Joy Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Joystick malfunction.
1. Access joysticks (WP 0267, Vol
2).
2. Turn keyless engine switch to
the AUX position (TM 5-3965-
385-10), but do not start engine.
3. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of
2) from between negative and
4.5 Volts Direct Current (VDC),
positive terminals on joystick
turn keyless engine switch to the
(WP 0447, Vol 3, Figure 15).
OFF position (TM 5-3965-385-
10), and replace joystick (WP
0267, Vol 2).
2. If voltage reads below 4.5 VDC,
turn keyless engine switch to the
OFF position (TM 5-3965-385-
10), and proceed to next
malfunction.
7. Right joystick wiring harness has
1. Disconnect right joystick wiring
an open circuit.
harness W8 J1 from right
pedestal wiring harness W9 J2
(WP 0451, Vol 3, Figure 25).
2. Turn keyless engine switch to
the AUX position (TM 5-3965-
385-10), but do not start engine.
3. Measure voltage (WP 0443, Vol
1. If voltage reads a minimum of
2) from W9 J2 Pin 1 to W9 J2
4.5 VDC, turn keyless engine
Pin 2 (WP 0451, Vol 3, Figure
switch to the OFF position (TM
25).
5-3965-385-10), and replace
right joystick wiring harness (WP
0380, Vol 2).
2. If voltage reads below 4.5 VDC,
turn keyless engine switch to the
OFF position (TM 5-3965-385-
10), and proceed to next
malfunction.
8. Right pedestal wiring harness
1. Disconnect right pedestal wiring
has an open circuit.
harness W9 J6 from main wiring
harness W1 J32 (WP 0451, Vol
3, Figure 6).
2. Turn keyless engine switch to
the AUX position (TM 5-3965-
385-10), but do not start engine.
0194-3