TM 5-3965-385-23-1
0193
Table 1. Right Console Left Joy Fault Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. If no fault is found, turn keyless
engine switch to the OFF
position (TM 5-3965-385-10),
and proceed to malfunction 6.
2. Propel controller (Electronic
1. Disconnect main wiring harness
Control Module (ECM)) has
W1 J2 from propel controller
damage or loose pin.
module ECM (WP 0451, Vol 3,
Figure 2).
2. Check propel controller module
1. If propel controller module ECM
ECM for damage or loose pin.
has damage or loose pin,
replace propel controller module
ECM (WP 0399, Vol 2).
2. If no damage is found, restore
equipment to original condition,
and proceed to next malfunction.
3. Main wiring harness has an
Measure for continuity (WP 0443,
1. If continuity is present, restore
open circuit.
Vol 3) between main wiring harness
equipment to original condition,
W1 J2 Pin 15 and W1 J32 Pin 5
and proceed to next malfunction.
(WP 0451, Vol 3, Figure 2 and 6).
2. If no continuity is present,
replace main wiring harness
(WP 0373, Vol 2).
4. Right pedestal wiring harness
Measure for continuity (WP 0443,
1. If continuity is present, proceed
has an open circuit.
Vol 3) between right pedestal wiring
to next malfunction.
harness W9 J2 Pin 4 and right
pedestal wiring harness W9 J6 Pin
5 (WP 0451, Vol 3, Figure 25 and
26).
2. If no continuity is present,
replace right pedestal wiring
harness (WP 0375, Vol 2).
5. Right joystick wiring harness has
Measure for continuity (WP 0443,
1. If continuity is present, replace
an open circuit.
Vol 3) between right joystick wiring
joystick (WP 0267, Vol 2).
harness W8 J1 Pin 4 (WP 0451, Vol
3, Figure 24) and left joystick
terminal A (WP 0447, Vol 3, Figure
14).
2. If no continuity is present,
replace right joystick wiring
harness (WP 0380, Vol 2).
0193-2
