TM 5-3895-385-23-1
0092
Table 1. Augers Fail to Raise Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6. Loss of hydraulic pressure at
1. Attach hydraulic pressure tester
left side auger lift hydraulic
(WP 0442, Vol 3) to hydraulic
cylinder.
hose 88 at left side auger lift
hydraulic cylinder (WP 0297, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press auger raise key on
pedestal top (TM 5-3895-385-
10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose 88
minimum of 1800 psi (12,410
at left side auger lift hydraulic
kPa), replace the left side auger
cylinder (WP 0297, Vol 2) while
lift hydraulic cylinder (WP 0408,
pressing auger raise key on
Vol 2).
pedestal top (TM 5-3895-385-
10).
2. If pressure reads below 1800
psi (12,410 kPa), replace
hydraulic hose 88 (WP 0297,
Vol 2).
7. Loss of hydraulic pressure at
1. Attach hydraulic pressure tester
right side auger lift hydraulic
(WP 0442, Vol 3) to hydraulic
cylinder.
hose 77 at right side auger lift
hydraulic cylinder (WP 0297, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press auger raise key on
pedestal top (TM 5-3895-385-
10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose 77
minimum of 1800 psi (12,410
at right side auger lift hydraulic
kPa), replace the right side
cylinder (WP 0297, Vol 2) while
auger lift hydraulic cylinder (WP
pressing auger raise key on
0408, Vol 2).
pedestal top (TM 5-3895-385-
10).
0092-5