TM 5-3895-385-10
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) Instructions -- Continued.
ITEM TO BE
CHECKED OR
ITEM
EQUIPMENT NOT
NO.
READY/AVAILABLE IF:
SERVICED
INTERVAL
PROCEDURE
b. Shut down BMPM if hydraulic
oil temperature exceeds 160
degrees Fahrenheit (F) (71
degrees Celsius (C)).
WARNING
Cooling system operates at high temperature and pressure. Contact with high-pressure
steam and/or liquids can cause burns and scalding. Shut down BMPM and allow system
to cool before performing checks, services, and maintenance. Wear gloves, additional
protective clothing, and goggles as required. Contact with high-pressure steam and/or
liquids can cause burns and scalding. Failure to comply may cause injury or death to
personnel.
65
During
Coolant
Periodically check coolant
Reservoir
reservoir to ensure coolant is
filled to proper level. Fill as
necessary (WP 0022).
66
During
Unusual Noise
Be alert to unusual noises, odors,
Damage that would
and visual indicators to problems
impair operation is
with engine or hydraulic system.
evident.
67
After
Display Screen
a. Turn on BMPM (WP 0006).
Indicators
b. Check fuel gauge to ensure
Gauge is below 25%.
fuel is at least 25% filled (WP
c.
Ensure hydraulic oil
Gauge is above normal
temperature gauge and water
range.
temperature gauge do not
exceed normal range (WP
d. Ensure voltmeter and oil
Gauge is above or below
pressure gauge is not above
normal range.
or below normal range (WP
0013-24