TM 5-3895-385-10
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) Instructions -- Continued.
ITEM TO BE
CHECKED OR
ITEM
EQUIPMENT NOT
NO.
READY/AVAILABLE IF:
SERVICED
INTERVAL
PROCEDURE
c.
Ensure hydraulic oil
Gauge is above normal
temperature gauge and water
range.
temperature gauge do not
exceed normal range (WP
d. Ensure voltmeter and oil
Gauge is above or below
pressure gauge is not above
normal range.
or below normal range (WP
58
Before
Screed Extension
Ensure all pieces are accounted
Damage that would
Kit
for and are not visibly damaged
impair operation is
evident.
59
Before
Left Control
a. Verify proper operation of
BMPM and engine do not
Pedestal
EMERGENCY STOP switch.
shut down.
WARNING
Ensure area around BMPM (especially around the screed) is clea r before performing
PMCS tests. Failure to comply may cause injury or death to personnel.
b. Ensure left and right tow point
Tow point hydraulic
hydraulic cylinders raise and
cylinders fail to raise and
lower properly (WP 0004).
lower.
c.
Ensure left and right screed
Screed extensions fail to
extensions extend and retract
extend and retract.
properly (WP 0004).
d. Ensure screed raises and
Screed fails to raise and
lowers properly (WP 0004).
lower.
e. Ensure truck hitch arms
Truck hitch arms fail to
extend and retract properly
extend and retract.
f.
Ensure augers raise and
Augers fail to raise and
lower properly (WP 0004).
lower.
g. Ensure hopper wings open
Hopper wings fail to open
and close properly (WP
and close.
0013-20