TM 5-3895-385-10
0011
Table 1. Bituminous Material Paving Machine (BMPM) Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Attempt operation with opposite
1. If opposite joysticks accomplish
(left or right) control pedestal
operation, notify field
joysticks.
maintenance.
2. If opposite joysticks do not
accomplish operation, turn
keyless engine switch to the
OFF position (WP 0006), and
proceed to next test.
WARNING
There are many points on the BMPM where personnel could be injured by moving parts. Turn
BMPM off before performing maintenance. Care should be taken to avoid any pinch points when
performing maintenance. Failure to comply may cause injury or death to personnel.
5. Check for obstructed movement.
1. Remove any obstructions
around BMPM.
2. Remove any obstructions in
and around tracks, bogies,
3. If no obstructions are found,
proceed to next test.
6. Check for proper hydraulic oil
1. Ensure hydraulic oil is at proper
level.
level and temperature, and fill
as necessary (WP 0019).
2. Notify field maintenance if
problem persists.
65. Right track fails to move
1. Check for Right Track Forward
1. If no fault is found, proceed to
forward or reverse.
EDC fault or Right Track
next test.
Reverse EDC fault indicated on
2. If fault is found, notify field
fault screen (WP 0004).
maintenance.