TM 5-3895-385-10
0006
ADJUST SCREED CROWN AND VALLEY -- CONTINUED.
Figure 32. Screed Crown Gauge.
2. Press and hold crown up key (Figure 31, Item 1) to raise screed crown until desired level is reached (refer to
screed crown adjustment gauge (Figure 32, Item 1)), and then release key.
3. Press and hold crown down (valley) key (Figure 31, Item 2) to lower screed crown until desired level is
reached (refer to screed crown adjustment gauge (Figure 32, Item 1)), and then release key.
4. Tighten two screed crown top bar bolts (Figure 30, Item 1) on right side of screed.
END OF TASK