TM 5-3895-385-10
0006
ADJUST SCREED END GATES
Figure 28. End Gate.
1. Use end gate height gauge (Figure 28, Item 3) to identify current level.
2. Release locking tab (Figure 28, Item 2).
NOTE
Turning end gate depth screw clockwise lowers end gate, and turning end gate depth screw
counterclockwise raises end gate.
3. Turn end gate depth screw (Figure 28, Item 1) to set end gate to desired depth.
4. Secure end gate depth screw (Figure 28, Item 1) with locking tab (Figure 28, Item 2).
5. Turn end gate tilt control bolt (Figure 28, Item 4) to set end gate to desired tilt.
END OF TASK