TM 5-3895-385-10
0006
ADJUSTING AUGER HEIGHT -- CONTINUED.
Figure 6. Control Pedestal -- Auger Height.
CAUTION
When driving BMPM up or down ramp or running over curbs or manholes, always make sure
augers are all the way up. Failure to comply may cause damage to equipment.
NOTE
Left and right auger height adjustment is done simultaneously. Independent auger height
adjustment is not possible. Normally augers are adjusted all the way down while paving and all
the way up for transport or driving over curbs, manholes, or other obstacles.
1. Press and hold auger raise key (Figure 6, Item 1) to raise auger height (Figure 5, Item 2) until desired level is
reached, and then release key.
2. Press and hold auger lower key (Figure 6, Item 2) to lower auger height (Figure 5, Item 1) until desired level is
reached, and then release key.
END OF TASK