TM 5-3895-373-34
2.66
REPLACE EXTENSION SCREED FRAME - Continued.
A.
REMOVE - Continued.
c.
Tag and disconnect blower motor electrical
connector (56) from screed harness electrical
connector (57).
d.
Cut all tie wraps (58) from screed harness (59).
Remove harness wiring from extension screed
(14).
5.
REMOVE EXTENSION SCREED BLOWER.
a.
Remove hex nuts (60) and clamp (61) from
flexible pipe (62). Discard exhaust clamp.
b.
Remove hex nut (41), lockwasher (42), flat
washers (43), and hex head cap screw (44) from
outer step support (63). Discard lockwasher.
c.
Remove outer step support (63) with attached
blower (64) and flexible pipe (62) from extension
screed (14).
GO TO NEXT PAGE
2-898
