TM 5-3895-373-34
D.
REPLACE - Continued.
2.
INSTALL INNER AND OUTER CHAIN GUIDE
BARS.
Wear safety goggles/glasses when working
underneath paving machine. Falling material
may cause eye damage. If material contacts
eyes,
flush
eyes
with
water
and
get
immediate medical attention.
a.
Place flat washers (45) on hex head cap
screws (44).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses when
using.
Avoid
contact
with
eyes.
If
compound contacts eyes, flush eyes with
water and get immediate medical attention.
b.
Apply thread locking compound to threads
of hex head cap screws (44).
c.
Install hex head cap screws (44) and flat
washers (45).
d.
Position and hold inner chain guide bar (33)
4.5 in. (114,3 mm) below bottom of
conveyor drag plate (46).
e.
Tighten hex had cap screws (44) to 90 lb-ft
(122 N•m).
f.
Place flat washers (43) on hex head cap
screws (42).
g.
Apply thread locking compound to threads
of hex head cap screws (42).
h.
Install hex head cap screws (42) and flat
washers (43).
i.
Position and hold outer chain guide bar (34)
4.5 in. (114,3 mm) below bottom of
conveyor drag plate (46).
j.
Tighten hex head cap screws (42) to 90 lb-ft
(122 N•m).
GO TO NEXT PAGE
2-843
