TM 5-3895-373-34
A.
REMOVE - Continued.
4.
REMOVE CONVEYOR DRAG PLATE GUARD.
a.
Remove hex head cap screw (11) and flat
washer (12).
NOTE
Hex
head
cap
screws
(13)
are
accessed by reaching from rear of
paving machine.
b.
Remove hex head cap screws (13) and flat
washers (14).
c.
With the help of another person, lift and slide
conveyor
drag
plate
guard
(15)
forward.
Remove drag plate guard over front end of
hopper.
5.
REMOVE INNER AND OUTER CONVEYOR
CHAIN GUARDS.
a.
Remove two hex head cap screws (16) and flat
washers (17) as shown.
b.
Remove inner conveyor chain guard (18).
c.
Remove hex head cap screws (19) and flat
washers (20).
d.
Remove outer conveyor chain guard (21).
GO TO NEXT PAGE
2-837
