TM 5-3895-373-34
2.55
REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued.
B.
CLEAN - Continued.
2.
CLEAN VALVE PANEL AREA WHERE
CONTROL VALVE OR FLOW DIVIDER HAS BEEN
REMOVED.
Cleaning solvent, P-D-680, is TOXIC
and
flammable.
Wear
protective
goggles and gloves. Use only in a well
ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame.
Never smoke when using solvent; the
flashpoint for Type m cleaning solvent is
200°F (93,3°C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh
air and medical help. If solvent contacts
skin or clothes, flush with cold water. If
solvent contacts eyes, flush eyes with
water and get immediate medical
attention.
a. Clean area of valve panel, where control valve or
flow divider has been removed, with a cleaning
cloth soaked with cleaning solvent to remove
grease, dirt, and hydraulic oil.
b. Wipe cleaned valve panel area dry with a
cleaning cloth.
GO TO NEXT PAGE
2-762
