TM 5-3895-373-34
D.
ASSEMBLE - Continued.
3.
INSTALL LOCK VALVE, INLET AND OUTLET
MANIFOLDS, AND THREADED END RODS
ONTO TOW POINT CONTROL VALVE.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Lubricate preformed packings (20) with
clean hydraulic oil and install onto lock
valve (19).
b.
Position lock valve (19) on valve body (15).
c.
Install lockwashers (18) onto socket head
cap screws (17).
d.
Install socket head cap screws (17) through
lock valve (19) and into valve body (15).
e.
Lubricate preformed packings (16) with
clean hydraulic oil and install onto inlet
manifold (13) and outlet side of valve body
(15).
f.
Install one flat washer (11) onto threaded
end rod (12).
g.
Install threaded end rod (12) through inlet
manifold (13), valve body (15), and outlet
manifold (14). Install flat washer (11) and
hex nut (10) onto end of threaded end rod.
h.
Do not tighten hex nut (10) at this time.
GO TO NEXT PAGE
2-641
