TM 5-3895-373-34
2.27
REPLACE/REPAIR HIGH SPEED SHIFT VALVE - Continued.
E.
ASSEMBLE - Continued.
2.
ASSEMBLE SUBPLATE AND INSTALL ONTO
MOUNTING BRACKET.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush eyes with water and get
immediate medical attention.
a.
Apply pipe sealant to pipe threads of
straight adapters (33) and tee (34).
b.
Install straight adapters (33) onto subplate
(28). Tighten straight adapters.
NOTE
Pipe plugs in bottom of subplate (28)
are used to alter valve configuration.
Do not remove pipe plugs.
c.
Install tee (34) onto subplate (28). Position
tee so that when tightened, tee points in
direction as shown in illustration.
d.
Install subplate (28) onto mounting bracket
(32). Position subplate so that tee (34)
points to the left when installed on the
mounting bracket. The mounting bracket
should be placed on a flat work surface with
the large mounting holes toward you. Refer
to illustration.
e.
Install lockwashers (31) and socket head
cap screws (30). Tighten cap screws.
GO TO NEXT PAGE
2-368
