TM 5-3895-373-34
2.27
REPLACE/REPAIR HIGH SPEED SHIFT VALVE- Continued.
E.
ASSEMBLE - Continued.
4.
INSTALL SOLENOID ASSEMBLY.
a.
Lubricate preformed packings (22) with
petrolatum.
b.
Install preformed packings (22) onto contact
pins of solenoid assembly (21).
c.
Apply electrical insulating compound to
terminal pins of solenoid assembly (21).
d.
Plug solenoid assembly (21) into high
speed shift valve (3).
e.
Install plastic nut (20) onto threaded end of
armature. Tighten plastic nut by hand until
snug, then tighten an additional 1/4 to 1/2
turn with an adjustable wrench.
GO TO NEXT PAGE
2-370
