TM 5-3895-373-34
E.
ASSEMBLE - Continued.
3.
INSTALL VALVE BODY AND ELECTRICAL
HOUSING ONTO SUBPLATE.
NOTE
When
installing
same
parts
as
removed during disassembly, align
matchmarks.
a.
Lubricate preformed packing (29) with
petrolatum and install preformed packing
into bottom of valve body (27).
b.
Position valve body (27) onto subplate (28).
Armature end of assembled valve body will
point to the bottom edge of mounting
bracket (32) away from the mounting holes.
c.
Install and tighten socket head cap screws
(26).
d.
Position electrical housing (24) onto valve
body (27). Open end of housing will align
with the armature.
e.
Install and tighten screws (25).
f.
Install terminal box connector (23) into
electrical housing (24). Terminal box
connector should be installed on the open
threaded end of the electrical housing.
Refer to illustration.
GO TO NEXT PAGE
2-369
