TM 5-3895-373-34
B.
DISASSEMBLE - Continued.
NOTE
Pipe plugs in bottom of subplate are
used to alter valve configuration. Do
not remove pipe plugs.
NOTE
Use bench vise, as required, to hold
subplate
and
mounting
bracket
during disassembly.
4.
REMOVE AND DISASSEMBLE SUBPLATE.
a.
Remove socket head cap screws (30) and
lockwashers (31). Discard lockwashers.
Separate subplate (28) from mounting
bracket (32). Do not remove pipe plugs in
bottom of subplate.
b.
Remove straight adapters (33).
c.
Remove tee (34).
5.
DISASSEMBLE VALVE BODY.
Internal components are small. Avoid
loss of internal components during
disassembly.
a.
Remove plug (35) and preformed packing
(36). Discard preformed packing.
b.
Remove armature (37) and preformed
packing (38). Discard preformed packing.
c.
Remove springs (39) from both sides of
valve body. Remove pin (40) from inside of
armature (37).
d.
Remove spring followers (41) from both
ends of spool (42). Pull spool from valve
body (27).
GO TO NEXT PAGE
2-363
