TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
C.
INSTALL - Continued.
35.
RECONNECT ELECTRICAL CONNECTIONS TO
THERMOSTAT HOUSING.
a.
Apply electrical insulating compound to end of
harness connector (42) and reconnect to engine
coolant temperature transducer connector (43).
Electrical insulating varnish fumes
can be harmful if inhaled. Use only in
a
well
ventilated
area.
Avoid
prolonged exposure to fumes. If
personnel become dizzy or drowsy
during use, get immediate medical
attention.
b.
Remove knurled nut (39) and install wire 105
(40) on coolant temperature sensor (41) terminal
and secure with knurled nut. Coat wire 105
terminal with electrical insulating varnish.
c.
Install self-locking screw (34) and wire 151 (38)
onto NC terminal on high temperature shutdown
sensor (35).
d.
Install self-locking screw (34) and wire 152 (37)
onto the NO terminal on high temperature
shutdown sensor (35).
e.
Install self-locking screw (34) and wire 111 (36)
onto the C terminal on high temperature
shutdown sensor (35).
f.
Coat wire 151 (38), wire 152 (37), and wire 111
(36) terminals with electrical insulating varnish.
GO TO NEXT PAGE
2-146
