TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
C.
INSTALL - Continued.
30.
APPLY ELECTRICAL INSULATING COMPOUND
ONTO END OF HARNESS CONNECTOR (59)
AND RECONNECT HARNESS CONNECTOR TO
TACHOMETER GENERATOR CONNECTOR (60).
31.
APPLY ELECTRICAL INSULATING COMPOUND
ON END OF HARNESS CONNECTOR (53) AND
RECONNECT
TO
FUEL
PRESSURE
TRANSMITTER CONNECTOR (54).
32.
APPLY ELECTRICAL INSULATING COMPOUND
ON END OF HARNESS CONNECTOR (51) AND
RECONNECT
TO
FUEL
DIFFERENTIAL
PRESSURE SWITCH CONNECTOR (52).
Electrical insulating varnish fumes
can be harmful if inhaled. Use only in
a
well
ventilated
area.
Avoid
prolonged exposure to fumes. If
personnel become dizzy or drowsy
during use, get immediate medical
attention.
33.
REMOVE KNURLED NUT (48) AND INSTALL
WIRE 104 (49) ONTO ENGINE OIL PRESSURE
TRANSMITTER (50) TERMINAL AND SECURE
WITH
KNURLED
NUT
COAT
WIRE
104
TERMINAL
WITH
ELECTRICAL
INSULATING
VARNISH.
GO TO NEXT PAGE
2-144
