TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
C.
INSTALL - Continued.
6.
INSTALL
CHARGE
FILTER
MOUNTING
BRACKET, AIR CLEANER, AND HYDRAULIC
CHARGE FILTERS ONTO PAVING MACHINE
FRAME.
a.
Turn charge filter mounting bracket (178), air
cleaner (183), and hydraulic charge filters (177)
sideways and lower into place aligning mounting
holes in mounting bracket with holes in paving
machine frame.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Coat threads of socket head cap screws (182)
with thread locking compound.
c.
Install and tighten socket head cap screws (182),
flat washer (181), lockwasher (180), and hex nut
(179).
7.
RECONNECT HYDRAULIC HOSES TO RIGHT
PROPULSION PUMP.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Coat threads of elbows (174 and 176) with
hydraulic fitting sealant and install charge pump
port A and port B hoses (173 and 175) to right
propulsion pump (164).
b.
Coat threads of elbows (172 and 170) with
hydraulic .½a fitting sealant and, using
combination wrench (Item 115, Appendix D),
install propulsion pump port B hose (171) and
propulsion pump port A hose (169) to right
propulsion pump (164).
GO TO NEXT PAGE
2-128
