TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
C.
INSTALL - Continued.
Do
not
let
the
engine
and
pump
assembly hit the sides of the engine
compartment or catch on disconnected
wiring
harnesses,
fuel
hoses
or
hydraulic hoses. Lower engine and
pump assembly slowly. Failure to do so
may cause damage to the electrical
system, fuel hoses, hydraulic hoses and
engine and pump assembly.
e.
Position two persons on top of the paving
machine to steady the engine and pump
assembly during installation. Place one person
at the pump end and the other person at the
opposite radiator fan end of the engine. Ensure
the engine and pump assembly does not hit the
sides of the engine compartment or catch on
disconnected electrical wires, fuel hoses, and
hydraulic hoses when lowered into the paving
machine engine compartment.
f.
Slowly lower engine and pump assembly (190)
into paving machine; stop just before resting on
the engine mounts. Make sure that you do not
hit the sides of the engine compartment or catch
on disconnected electrical wires, fuel hoses, and
hydraulic hoses. Personnel should guide engine
and pump assembly into the engine
compartment.
GO TO NEXT PAGE
2-124
