TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
C.
INSTALL - Continued.
4.
INSTALL
SHOCK
MOUNTS
ONTO
ENGINE,
FLYWHEEL
HOUSING
AND
PUMP
DRIVE
GEARBOX MOUNTS IN PAVING MACHINE.
a.
Install washers (203) onto hex head cap screws
(202) and install into engine mounts (204) and
shock mounts (201). Ensure hex head cap
screw shaft extends all the way through center of
shock mount.
b.
Install flat washers (200) onto hex head cap
screws (199).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact
with
eyes.
If
compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Coat threads of hex head cap screws (199) with
thread locking compound and install cap screws
and shock mounts (201). Install engine ground
wire (198) to front right engine mount (204) as
shown. Tighten cap screws 37 Ib-ft (50 N•m).
d. Position hydraulic hoses (138, 137, 131, 130,
146, 151 and 153) and fuel line as shown in
illustration. Ensure hydraulic hoses are laid flat
and not stacked.
GO TO NEXT PAGE
2-122
