TM 5-3895-373-34
2.15
REPLACE CYLINDER HEAD ASSEMBLY - Continued.
C.
INSTALL Continued.
d.
Install wire 105 (37) to coolant temperature
sensor (36).
e.
Install knurled nut (35) onto the terminal of
coolant temperature sensor (36).
WARNING
Electrical insulating varnish fumes
can be harmful if inhaled. Use only in
a
well
ventilated
area.
Avoid
prolonged exposure to fumes. If
personnel become dizzy or drowsy
during use, get immediate medical
attention.
f.
Apply electrical insulating varnish to all wires and
connectors.
g.
Apply electrical insulating compound to male end
of wiring harness connector (38).
h.
Connect wiring harness connector (38) with
engine coolant temperature transducer (39).
i.
Use tie wraps as necessary to secure the wiring
harness away from the exhaust manifold and
any moving parts.
7.
CONNECT
COOLANT
HOSES
TO
THERMOSTAT HOUSING.
a.
Connect coolant hose (24) to thermostat housing
(25) and tighten hose clamp (23).
b.
Install
coolant
bypass
hose
(27)
between
thermostat housing (25) and water pump.
Tighten hose clamps (26).
c.
Install
upper
coolant
hose
(29)
between
thermostat housing (25) and radiator. Tighten
hose clamps (28).
GO TO NEXT PAGE
2-78
