5. REMOVE BOLT AND PREFORMED PACKINGS FROM FUEL SPRAY WAND

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
895

TM 5-3895-373-20 B. DISASSEMBLE - Continued. 5. REMOVE BOLT AND PREFORMED PACKINGS FROM FUEL SPRAY WAND. a. Remove bolt (19). b. Insert cable assembly (15), threaded end first, into fuel spray wand. c. Push cable assembly into fuel spray wand until preformed packings (20) emerge from body (21). Discard preformed packings. d. Remove cable assembly. Discard cable assembly. C. ASSEMBLE. 1. INSTALL SPRING, CABLE ASSEMBLY, SEAT, SPRAY TIP, AND TIP RETAINER INTO FUEL SPRAY WAND. a. Align spray tube (18) with body (21) and secure with tube nut (17). b. Install spring (16) onto cable assembly (15). c. Install cable assembly (15) and spring (16) into fuel spray wand. d. Assemble seat (14) and spray tip (13) into tip retainer (12). e. Install assembled seat (14), spray tip (13), and tip retainer (12) onto fuel spray wand. Tighten tip retainer hand tight. GO TO NEXT PAGE 12-5

Privacy Statement
Press Release
Contact