B. DISASSEMBLE - TM-5-3895-373-20

5. REMOVE BOLT AND PREFORMED PACKINGS FROM FUEL SPRAY WAND

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
894

TM 5-3895-373-20 12.2. REPLACE/REPAIR FUEL SPRAY COMPONENTS - Continued. B. DISASSEMBLE. 1. REMOVE STRAIGHT ADAPTER (3), FROM FUEL SPRAY WAND (2). 2. REMOVE QUICK DISCONNECT COUPLING (5) AND STRAIGHT ADAPTER (6) FROM HOSE (4). 3. REMOVE HEX NUT, SELF-LOCKING HEX NUT, AND FUEL SPRAY TRIGGER FROM FUEL SPRAY WAND. a. Use a flat-blade screwdriver to hold trigger screw (7) while removing machine screw (8). b. Remove trigger screw (7) and fuel spray trigger (9). c. Remove hex nut (10) and self-locking hex nut (11). Discard self-locking hex nut. 4. REMOVE TIP RETAINER, SPRAY TIP, SEAT, CABLE ASSEMBLY, AND SPRING FROM FUEL SPRAY WAND. a. Remove tip retainer (12), spray tip (13), and seat (14). Discard tip retainer, spray tip, and brass seat. b. Use a finger to press on threaded end of cable assembly (15) in trigger handle. Push in until cable assembly sticks out opposite end of spray wand. c. Remove cable assembly (15) and spring (16). Discard spring compression assembly. d. Loosen tube nut (17) and remove spray tube (18). GO TO NEXT PAGE 12-4

Privacy Statement
Press Release
Contact