TM 5-3895-373-20
11.5.
REPLACE/REPAIR SEAT ASSEMBLY - Continued.
C.
INSTALL - Continued.
3.
INSTALL ASSEMBLED SEAT AND UPPER
SEAT
PEDESTAL
ONTO
LOWER
SEAT
PEDESTAL.
a.
Pull work light wiring harness (1) out
through top of lower seat pedestal (2).
b.
Install assembled seat (6) and upper seat
pedestal (7) into lower seat pedestal (2).
Make sure wire harness goes through
upper seat pedestal. Do not pinch wire
between upper and lower seat pedestals.
c.
Set seat to correct height and insert locking
pin (5). Install retaining pin (4) and knob
(3).
NOTE
FOLLOW-ON-TASK: Install work light under seat per paragraph 7.12.
END OF TASK
11-46