TM 5-3895-373-20C. INSTALL.1.INSTALL LOWER SEAT PEDESTAL.WARNINGThread locking compound solventcan cause eye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If solvent contactseyes, flush with water and getimmediate medical attention.a.Clean seat mounting studs and hex headcap screws (13) with thread lockingcompound solvent.WARNINGThread locking compound can causeeye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If compoundcontacts eyes, flush eyes with waterand get immediate medical attention.b.Apply thread locking compound to hex headcap screws (13).c.Pull work light wiring harness (1) up throughlower seat pedestal (2) bottom and installseat pedestal. Do not pinch wiring underseat pedestal.d.If installing left hand seat, install hex headcap screws (13) and secure locking pin (5)with front left hand corner cap screw. Installflat washers (12) and hex nuts (11).e.If installing right hand seat, install hex headcap screws (13) and secure locking pin (5)with front right hand corner cap screw.Install flat washers (12) and hex nuts (11).f.Tighten hex nuts (11) to 37 lb-ft (50 N.m).2.ASSEMBLE SEAT TO UPPER SEATPEDESTAL.a.Install assembled seat (6) onto upper seatpedestal (7). Secure front of seat with hexnuts (10).b.Install slow moving vehicle sign (9) ontoseat mounting studs and secure with hexnuts (8).GO TO NEXT PAGE11-45
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business