TM 5-3895-373-20
A.
REMOVE - Continued.
7.
REMOVE AND DISASSEMBLE INNER STEP
SUPPORTS.
a.
Remove bolts (78), hex nuts (79), and flat
washers (80) from vibration mounts (53).
b.
Remove vibration mounts (53) from inner step
supports (85). Discard vibration mounts.
c.
Remove hex head cap screws (81), hex nuts
(82), lockwashers (83), and flat washers (84).
Discard lockwashers.
d.
Remove inner step supports (85) from extension
screeds (76 and 77).
B.
CLEAN.
1.
CLEAN MOUNTING HARDWARE.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Remove thread locking compound from threads
of all mounting hardware using thread locking
compound solvent.
b.
Dry screw threads with a cleaning cloth.
GO TO NEXT PAGE
11-23
