TM 5-3895-373-20
A.
REMOVE - Continued.
g.
Remove hex head cap screws (32), lockwashers
(33), and flat washers (34) from three places on
each screed handrail (25) mounting base.
Discard lockwashers.
h.
Remove hex head cap screw (35), lockwasher
(36), flat washer (37), and ground wires (38, 39,
and 40). Discard lockwasher.
i.
Remove hex head cap screw (41), lockwasher
(42), flat washer (43), and ground wires (44 and
45). Discard lockwasher.
NOTE
Removal of screed guard plates is
required to gain access to bolts (46)
securing handrail (25) to walkway
step.
j.
Remove bolts (46), hex nuts (47), and flat
washers (48) from rail supports of main walkway
step (18).
k.
With help of another person, lift and remove
screed handrail (25) from screed.
GO TO NEXT PAGE
11-19
