5. REMOVE MAIN WALKWAY STEP AND EXTENSION WALKWAY STEPS FROM SCREED

A. REMOVE - Continued - TM-5-3895-373-20_873

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
864

TM 5-3895-373-20 11.3. REPLACE WALKWAYS, SCREED GUARD PLATES, AND SCREED HANDRAIL - Continued. A. REMOVE - Continued. 5. REMOVE MAIN WALKWAY STEP AND EXTENSION WALKWAY STEPS FROM SCREED. a. Fully extend extension screeds. Refer to TM 5- 3895-373-10. b. Raise and crib screed. Refer to paragraph 2.24.2. c. Reach under extension walkway step (49) and remove hex head cap screws (50), flat washers (51), and lockwashers (52) from vibration mounts (53). There are two vibration mounts on each end of the right and left extension walkway steps. Discard lockwashers. NOTE Damaged walkway steps may be pinched together, making removal of extension walkway steps difficult. If this is the case, next step may be skipped. d. With the help of another person, pull right and left extension walkway steps (49) free of main walkway step (18). GO TO NEXT PAGE 11-20

Privacy Statement
Press Release
Contact