TM 5-3895-373-20
A.
REMOVE Continued.
2.
REMOVE BATTERIES.
Battery acid is extremely corrosive.
Take care when handling batteries.
Spilled
battery
acid
can
cause
equipment damage and injury to
personnel. If battery acid contacts
skin, flush skin with water and get
immediate medical attention.
a.
Remove batteries (10) and battery boxes (11)
from battery compartment using handles on
battery boxes. Remove inboard battery by lifting
straight up through rear top left access opening.
Remove outboard battery from side of machine
through left access cover opening.
b.
Remove batteries (10) from battery boxes (11).
c.
Remove battery box holddown straps (1).
d.
Discard battery boxes (11) and battery box
holddown straps (1). Dispose of used storage
batteries in accordance with local procedures.
B.
INSTALL.
1.
INSTALL BATTERIES.
a.
Place batteries (10) in battery boxes (11).
b.
Install battery box holddown straps (1) through
slots in floor of battery compartment.
c.
Place batteries (10) and battery boxes (11) in
battery compartment. Make sure terminals are
oriented correctly. Install inboard battery by
lowering through rear top left access opening.
Install outboard battery through left access cover
opening on side of machine.
GO TO NEXT PAGE
7-141
