3. REMOVE JUMPER BATTERY CABLE

2. REMOVE NEGATIVE BATTERY CABLE AND SHUNT GROUND CABLE

A. REMOVE Continued - TM-5-3895-373-20_797

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
788

TM 5-3895-373-20 7.20. REPLACE BATTERY CABLES Continued. A. REMOVE Continued. 3. REMOVE JUMPER BATTERY CABLE. a. Lift battery terminal caps (15) from battery terminals. b. Remove battery nuts (16). c. Remove hex nut (17) and lockwasher (18) from voltage transformer 12 V terminal. Discard lockwasher. d. Tag and remove lead wire 166 (19) and jumper lead wire (20) from voltage transformer 12 V terminal. e. Remove jumper battery cable (21). 4. REMOVE POSITIVE BATTERY CABLE. a. Tag and disconnect DCA harness connector (22) from positive battery cable harness. b. Remove hex nut (23) and lockwasher (24) from voltage transformer 24 V terminal. Discard lockwasher. c. Tag and remove lead wire 167 (25), lead wire 160 (26), and lead wire 161 (27) from voltage transformer 24 V terminal. GO TO NEXT PAGE 7-146

Privacy Statement
Press Release
Contact