TM 5-3895-373-20
A.
REMOVE Continued.
2.
REMOVE EXHAUST MUFFLER AND
MUFFLER BRACKETS.
a.
Loosen nuts securing clamp (7) to pipe reducer
(8).
b.
Remove screws (9) and nuts (10) from muffler
mounting clamps (11).
c.
Pull apart muffler mounting clamps (11) and lift
exhaust muffler (6) off pipe reducer (8) and
remove from machine. Discard exhaust muffler.
d.
Remove bolts (12) and flat washers (13)
securing muffler mounting clamps (11) to muffler
brackets (14). Discard muffler mounting loop
clamps.
e.
Remove and discard loop clamp (7).
f.
Remove hex head cap screws (15), lockwashers
(16), and flat washers (17) securing muffler
brackets (14) to muffler support bracket (18).
Discard lockwashers.
g.
Remove muffler brackets (14).
3.
REMOVE EXHAUST PIPE.
Hold exhaust pipe when removing pipe
reducer to prevent exhaust pipe elbow area
from breaking. Cracks or breaks in the flex
material result in carbon monoxide leakage.
a.
Loosen nuts on clamp (19) securing pipe
reducer (8) to exhaust pipe (20).
b.
Remove and discard loop clamp (19).
c.
Remove pipe reducer (8). Discard pipe reducer.
GO TO NEXT PAGE
5-3
