4.9. REPLACE FUEL FILTER ASSEMBLY

4.9. REPLACE FUEL FILTER ASSEMBLY - Cont

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
589

TM 5-3895-373-20 4.9. REPLACE FUEL FILTER ASSEMBLY. This task covers: a. Remove b. Install INITIAL SETUP Tools: Preformed packings General mechanic’s automotive tool kit Ring spacers (Item 54, Appendix E) Rubber compression sleeves Drip pan (Item 28, Appendix E) O-ring tool (Item 52, Appendix E) References: Torque wrench (Item 68, Appendix E) TM 5-3895-373-10 TM 5-3895-373-24P Materials/Parts: Cleaning cloth (Item 7, Appendix C) Equipment condition: JP8 fuel (Item 14, Appendix C) Front top left access door opened per TM 5-3895-373-10. Hydraulic fitting sealant (Item 21, Appendix C) Front top right access door opened per TM 5-3895-373-10. Machinery wiping towels (Item 30, Appendix C) Protective caps (Item 5, Appendix C) Thread locking compound (Item 12, Appendix C) Thread locking compound solvent (Item 25, Appendix C) Fuel filter assembly Flat washers Gasket Lockwashers A. REMOVE. 1. REMOVE FUEL FILTER ASSEMBLY FROM CYLINDER HEAD ASSEMBLY AND DRAIN FUEL FILTER. Fuel is very flammable and can explode easily. To avoid serious injury or death: Always wear safety glasses/goggles at all times. Keep at least a B-C fire extinguisher within easy reach when working with fuel or any fuel system. Do not work on fuel system when engine is hot; fuel can be ignited by a hot engine. Post signs that read "NO SMOKING WITHIN 50 FEET" when working with open fuel lines or fuel tanks. a. Place a machinery wiping towel below fuel filter assembly (1). GO TO NEXT PAGE 4-53

Privacy Statement
Press Release
Contact