TM 5-3895-373-20
2.24.4. HOISTING - Continued.
B.
HOISTING ENDS OF PAVING MACHINE-
Continued.
2.
HOIST REAR OF PAVING MACHINE.
a.
Unlock handle (1) and slide operator control
console (2) to center of guide shaft (3).
b.
Lock handle (1) on operator control console (2).
Paving
machine
weighs
approximately 21,400 lbs (9707 kg).
Ensure that each cable/chain selected
is capable of lifting 10,000 lbs (4536
kg).
Do not lift entire paving machine
without two cables/chains attached.
Ensure that overhead lifting device is
capable of lifting the entire weight of
the paving machine, 21,400 lbs (9707
kg).
Failure to follow all of the above can
result in paving machine
falling
causing personal injury or death.
c.
Attach 2 ea, 12 ft (3,7 m) cables to rear lifting
lugs (5).
d.
Attach other end of both 12 ft (3,7 m) cables to
overhead lifting device.
Do not allow personnel under paving
machine when paving machine is
suspended off of the ground with an
overhead lifting device. Paving
machine can fall and cause severe
injury or death.
Paving
machine
weighs
approximately 21,400 lbs (9707 kg).
Ensure machine is securely attached
to overhead lifting device and lifting
device is capable of lifting entire
weight of paving machine before
performing
any
lifting.
Severe
personal injury or death may occur
from not securely attaching machine
before lifting.
e.
Using overhead lifting device, lift rear of paving
(9707 kg).
f.
Using overhead lifting device, lower paving
machine onto or off of cribbing per paragraph
2.24.2.
g.
Remove lifting cables from paving machine.
END OF TASK
2-470
