TM 5-3895-373-20
2.24.3. SCREED REMOVAL AND INSTALLATION - Continued.
A. REMOVE Continued.
b.
Unscrew and unplug screed harness plug (2)
from center of tractor bulkhead.
2.
DISCONNECT SCREED FUEL AND
HYDRAULIC HOSES.
Fuel is very flammable and can explode easily. To avoid
serious injury or death:
Always wear safety glasses/goggles at all times.
Keep fuel away from open flame or any spark (ignition
source).
Keep at least a B-C fire extinguisher within easy reach
when working with fuel or on a fuel system.
Post signs that read "NO SMOKING WITHIN 50 FEET"
when working with open fuel lines or fuel tanks.
Hydraulic oil under pressure can penetrate skin or
damage eyes. To avoid severe injury or loss of limb:
Wear safety goggles for protection.
Place folded machinery wiping towel over fitting when
loosening.
Slowly open fitting and allow hydraulic oil pressure to
bleed off before removing.
If hydraulic oil enters skin or eye, get immediate medical
attention.
Hydraulic oil can be moderately flammable and can be
an irritant to the skin, eyes, and respiratory system.
Avoid prolonged exposure. Eye protection and rubber
gloves must be worn when working with hydraulic oil.
GO TO NEXT PAGE
2-456
