TM 5-3895-373-20
2.23.7. REPLACE FUEL LIFT PUMP FILTER SCREEN - Continued.
A. REMOVE.
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
any spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Do not work on fuel system when
engine is hot; fuel can be ignited by a
hot engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
HI cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
DAMPEN
LINT-FREE
CLOTHS
WITH
CLEANING SOLVENT. WIPE ALL DUST,
DIRT, AND OIL OR GREASE BUILDUP
FROM OUTER SURFACES OF FUEL LIFT
PUMP (1).
2.
PLACE MACHINERY WIPING TOWEL UNDER
FUEL LIFT PUMP (1).
3.
REMOVE
CAP
SCREW
(2)
AND
SEAL
WASHER (3). DISCARD SEAL WASHER.
4.
REMOVE
FILTER
COVER
(4)
AND
PREFORMED
PACKING
(5).
DISCARD
PREFORMED PACKING.
5.
REMOVE AND DISCARD FILTER SCREEN (6).
GO TO NEXT PAGE
2-418
