TM 5-3895-373-20
2.23.6. REPLACE SCREED BURNER AND FUEL SPRAY FUEL FILTER ELEMENT - Continued.
B.
INSTALL - Continued.
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
2.
INSTALL FUEL FILTER ASSEMBLY.
a.
Install fuel filter assembly (1) on mounting
bracket (8).
b.
Secure with hose clamps (7).
3.
CONNECT FUEL FILTER HOSES.
WARNING
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
CAUTION
Do not apply hydraulic fitting sealant
to
leading
threads
of
elbows.
Seepage of hydraulic fitting sealant
into fuel system may clog fuel nozzle.
a.
Apply a light coating of hydraulic fitting sealant to
threads of elbows (4 and 5). Do not apply hydraulic
fitting sealant to leading threads. Ensure sealant is used
sparingly so as not to clog fuel system components.
b.
Connect fuel filter hoses (2 and 3) to elbows and
tighten.
NOTE
FOLLOW-ON-TASKS: Bleed screed fuel system per paragraph 2.23.11.
Close rear top left access door per TM 5-3895-373-10.
END OF TASK
2-416
