TM 5-3895-373-20
B.
INSTALL - Continued.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
c.
Use thread locking compound solvent to clean
the threads of hex head cap screws (16 and
13).
d.
Dry hex head cap screws (16 and 13) with a
cleaning cloth.
e.
Install lockwashers (17 and 14) onto hex head
cap screws (16 and 13).
Thread locking compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes. If
compound contacts eyes, flush eyes with
water and get immediate medical
attention.
f.
Apply thread locking compound to threads of
hex head cap screws (16 and 13).
g.
Install hex head cap screw (16), clamp (15)
and hex head cap screws (13) securing screed
extension cylinder (7) in place.
h.
Tighten hex head cap screw (16).
i.
Tighten hex head cap screws (13) to 37 lb-ft
(50 Nm).
GO TO NEXT PAGE
15-83