TM 5-3895-373-20
A.
REMOVE - Continued.
4.
REMOVE ADAPTERS AND PLUG.
Cleaning solvent, PD680, is TOXIC and
flammable. Wear protective goggles and
gloves.
Use only in a well ventilated area. Avoid
contact with skin, eyes, and clothes, and
do not breathe vapors. Keep away from
heat or flame. Never smoke when using
solvent; the flashpoint for Type m
cleaning solvent is 2000F (93,3°C).
Failure to do so may result in injury or
death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh air
and medical help. If solvent contacts skin
or clothes, flush with cold water. If
solvent contacts eyes, flush eyes with
water and get immediate medical
attention.
a.
Clean and remove any dirt or foreign matter
from screed extension cylinder exterior with
cleaning solvent. Scrub off hard deposits with
a cleaning brush. Wipe dry with a clean,
cleaning cloth.
b.
Remove plug (20) and preformed packing (21)
from screed extension cylinder (7). Discard
preformed packing.
c.
Remove straight adapters (22) and preformed
packings (23). Discard preformed packings.
GO TO NEXT PAGE
15-81
