TM 5-3895-373-10 APPENDIX B COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (Bll) SECTION I.  INTRODUCTION B.1 SCOPE. This  appendix  lists  components  of  end  item  and  basic issue items for the 780T Asphalt Paving Machine to help you    inventory    items    required    for    safe    and    efficient operation. B.2 GENERAL. The   components   of   End   Item   and   Basic   Issue   Items Lists are divided into the following sections: a. Section   II.      Component   of   End   Item   (COEI). This  listing  is  for  informational  purposes  only  and  is  not an  authority  to  requisition  replacements.    These  items are part of the end item but are removed and separately packaged for transportation or shipment.  As part of the end    item,    these    items    must    be    with    the    end    item whenever  it  is  issued  or  transferred  between  property accounts.      Illustrations   are   furnished   to   assist   you   in identifying the items. LH screed extension plate (10) and RH  screed  extension  plate  (11)  are  mated  to  a  paving machine  by  installation  of  shims  (not  included)  through alignment of the screed.  When a new or repaired screed extension  plate  is  received,  notify  unit  maintenance  to perform screed alignment procedure. b. Section  III.    Basic  Issue  Items  (BII).    These  are the minimum essential items required to place the paving machine   in   operation,   to   operate   it,   and   to   perform emergency repairs. Although shipped separately packaged,  BI  must  be  with  the  paving  machine  during operation    and    whenever    it    is    transferred    between property  accounts.    The  illustrations  will  assist  you  with hard-to-identify  items.    This  manual  is  your  authority  to request/requisition replacement BII, based on TOE/MTOE authorization of the end item. B.3 EXPLANATION OF COLUMNS. The following provides an explanation of columns  found in the tabular listings. a. Column  (1)  Illustration  Number  (Illus  Number). This     column     indicates     the     number     of     the illustration in which the item is shown. NOTE Assemblies identified as "Not procurable  as  an  assembly"  are  for reference only.  Order individual parts for any required replacements. b. Column  (2)  National  Stock  Number.    Indicates the National Stock number assigned to the item and will be used for requisitioning purposes. c. Column  (3)  Description.    Indicates  the  Federal item  name  and,  if  required,  a  minimum  description  to identify and locate the item.    The  last  line  for  each  item indicates the CAGE (in parentheses) followed by the part number. d. Column (4) Unit of Measure (U/M).  Indicates the measure used in performing the actual operational/maintenance    function.        This    measure    is expressed  by  a  two-character  alphabetical  abbreviation (e.g, ea, in., pr). e. Column (5) Quantity required (Qty Rqd). Indicates  the  quantity  of  the  item  authorized  to  be  used with/on the paving machine. B-1