TM 5-3895-373-10
b.
Place left and right feeder control switches (2) to
the up, ON position.
c.
Turn the left and right auger/conveyor switches
(3) to the center, OFF position.
d.
Open flow gates by moving the left and right flow
gate switches (4) to the up, OPEN position.
e.
Empty hopper wings of all residual paving
material by moving hopper wing switches (5) to
the up, RAISE position.
f.
Turn left and right auger/conveyor speed control
valves (6) clockwise to the fully open position.
2-102
