1.10 LOCATION AND DESCRIPTION OF MAJOR COMPONENTS

TM-5-3895-373-10 Distributor Liduid Bitumious Seaman-Maxon Inc Model BIT Manual
Page Navigation
4

TM 5-3895-373-10 1.10 LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. 1. SCREED CREW CONTROL BOXES. Contain major screed and feeder system control functions. 2. PAVING MACHINE OPERATOR CONTROL CONSOLE. Provides controls for operating the paving machine, conveyors, flow gates, and augers. 3. NATO SLAVE RECEPTACLE. It is the connecting point for the slave cable used to slave start the vehicle from an external source. 4. ENGINE COMPARTMENT. Location of diesel engine, hydraulic pumps, hydraulic reservoir, and fuel tank. 5. TRACK DRIVES. Provide a large, stable surface area to support the weight of the paving machine. The track drives are hydraulically powered. 6. SCREED TOW ARMS. Connect the tractor to the screed and allow the tractor to pull the screed. 7. FUEL SPRAY WAND ASSEMBLY. Used to wash down areas of the paving machine constantly exposed to paving material. Hose has a quick disconnect coupling, and wand is trigger activated. 8. ENDGATE ASSEMBLIES. Prevent outward movement of paving material to control paving width. Provide the edge to the paving material. 9. THICKNESS CONTROLS. Control the amount of material passing under the screed. 10. AUGERS. Spread paving material evenly across the width of the screed. 11. SCREED. Controls the thickness and provides initial finish and compaction of paving mat. 12. FIRE EXTINGUISHER. Portable fire extinguisher for use on all classes of fires. 13. WORK LIGHTS. Illuminate areas of the paving machine during night operation. Two additional lights located below main operator’s deck directly under operator’s seat. 1-4

Privacy Statement
Press Release
Contact