TM 5-3895-373-10
1.2
MAINTENANCE FORMS AND PROCEDURES.
Department of the Army forms and procedures used for
equipment maintenance will be those prescribed by DA
PAM 738-750, the Army Maintenance Management
System.
1.3
CORROSION PREVENTION AND CONTROL
(CPC).
Corrosion Prevention and Control (CPC) of Army
material is a continuing concern. It is important that any
corrosion problem be reported, so the problem can be
corrected and improvements can be made to prevent the
problem in the future. While corrosion is typically
associated with rusting of metals, it also includes the
deterioration of other materials, such as rubber and
plastic. Unusual cracking, softening, swelling, or
breaking of these materials may indicate a corrosion
problem.
If a corrosion problem is identified, report it using an SF
368, Quality Deficiency Report. Completed forms should
be submitted to the address specified in DA PAM 738-
750. Use of key words such as "corrosion", "rust",
"deterioration", or "cracking" will ensure the information is
identified as a CPC problem.
1.4
DESTRUCTION OF ARMY MATERIEL TO
PREVENT ENEMY USE.
Procedures for destruction of Army tank-automotive
materiel to prevent enemy use are listed in TM 750-244-
6.
1.5
REPORTING EQUIPMENT IMPROVEMENT
RECOMMENDATIONS (EIR).
If the Paving Machine needs improvement, let us know.
Send us an EIR. You, the user, are the only one who
can tell us what you don’t like about your equipment. Let
us know why you don’t like the design or performance.
Put it on an SF 368 (Product Quality Deficiency Report).
Mail it to us at Commander, U.S. Army Tank-automotive
and
Armaments
Command,
AMSTA-TR-E/MPA,
Warren, MI 48397-5000.
1.6
WARRANTY INFORMATION.
The Paving Machine warranty is detailed in Warranty
Technical Bulletin (WTB) number TB 5-3895-373-14.
1.7
REFERENCE INFORMATION.
This listing includes the nomenclature cross-reference
list, list of abbreviations, and explanation of terms
(glossary) used in this manual.
a.
Nomenclature Cross-Reference List.
Common Name
Official Nomenclature
Ignition Switch
Sensitive Switch
Paving Machine
Bituminous Material
Paving
Machine
Hopper Wing
Aggregate Feeder
Screed
ES-80 (Diesel) Hydraulic
Vibratory Extendable
Screed
Tow Arm
Finisher Arm
Hopper
Aggregate Hopper
Flashing
Solid Rubber
Auger
Screw Conveyor
Latch
Pawl Fastener
Stud Weld Nut
Fuel/Water Separator Fuel Filter
Fuel Spray Wand
Nozzle and Hose
Assembly
Assembly
Pump Drive Gearbox Angle Drive Unit
Speed Reduction
Speed Gear Assembly
Gearbox
Auger Flight Screw Conveyor
b.
List of Abbreviations/Acronyms.
Auto
Automatic
F/R
Forward/reverse
MAN
Manual
MAX
Maximum
N
Neutral
rpm
Revolutions per minute
fpm
Feet per minute
mph
Miles per hour
vpm
Vibrations per minute
c.
Glossary.
Bituminous Asphalt
Dense-graded asphalt concrete
material consisting of a uniform
or continuous aggregate grading
with an asphalt cement binder.
Eccentric Shaft
A shaft which is geometrically
unbalanced, designed to
produce an oscillating motion.
Feeder
Combination of conveyor and
augers, collectively.
Hydrostatic
Hydraulic fluid in a hydraulic
system where fluid at rest or
under pressure exerts or
transmits a force.
1-2
