Figure 3-103. Remove/Install Asphalt Pump

Section VII. REPAIR OF COMBUSTION CHAMBER

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
213

TM 5-3895-371-24 & P b. Installation. (1) Place the pump on a hydraulic jack and position the asphalt pump assembly (1, fig. 3- 103) with a new gasket (2) under the control valve. (2) Install studs that fasten the asphalt pump assembly (1) to the control valve. (3) Connect header assembly (6) in five places to two valve assemblies (5) and the asphalt pump assembly (1). Use new gaskets (4). (4) Install stud (7), washer (8), and nut (9) that fasten header assembly to asphalt pump. LEGEND: 1. ASPHALT PUMP ASSEMBLY 5. VALVE ASSEMBLY (2) 2. GASKET 6. HEADER ASSEMBLY 3. RETURN LINE ASSEMBLY 7. STUD (8) 4. GASKET (6) 8. WASHER (8) 9. NUT (8) Figure 3-103. Remove/Install Asphalt Pump. TA 075977 3-85

Privacy Statement
Press Release
Contact